B-CONTROL- One Or More Of My BCF2000 Or BCR2000 Encoders Are Not Lit, Are They Broken?

 

 

 

 

 

 

 

 

 

If you see an encoder on your BCF/BCR that is not lit, do not panic. It is most likely turned off.

1. While HOLDING down EDIT, move the encoder.
2. On the top row of encoders, go to the encoder all the way to the LEFT. Turn it to make sure that it does not read OFF.
3. Press Exit.
4. Press STORE twice to save your work.

 


Share this page