DEQ- How Do I Access And Operate Different Functions On My DEQ2496?

new logo JPEG.jpg

 

 

Graphic Equalizer:

 

- Press the GEQ button to display the GEQ menu.

- Turn the small Upper Data Wheel to select the frequency to deal with.

- Turn the small Lower Data Wheel to select the bandwidth you want to affect.

- Turn the Large Data Wheel to adjust the GAIN of the frequency.

- For each control you will see visual feedback from the curve in the middle of the display and the numbers on the right of the display. 

 

Parametric Equalizer:

 

- Press the PEQ button to display PAGE 1 of the PEQ menu.

- Turn the small Upper Data Wheel to select the frequency to work with.

- Turn the small Lower Data Wheel to adjust the bandwidth you want to affect. 

- Turn the Large Data Wheel to adjust the GAIN of the frequency.

- For each control you will see visual feedback from the curve in the middle of the display and the numbers on the right of the display. 

 

Auto-EQ:

 

- Press the RTA button to show PAGE 1 of the RTA menu display.

- Press the B button (next to the 'AUTO EQ' indicator on the left-hand side of the display).

- Turning the Data Wheels will now adjust the target EQ curve that you want to achieve.

- Press the PAGE button to advance to page 2 of the Auto EQ menu.

- Press the A button (next to the 'START AUTOEQ' indicator on the left-hand side of the display) to start the Auto-EQ process.

- Press the A button again to stop the process

- Preass the PAGE button to advance to page 3 of the AEQ menu.

- Press the B button (next to the 'DONE' indicator on the left-hand side of the display) to exit Auto-EQ mode. 

 

Compressor/ Expander:

 

- Press the DYN button until PAGE 1 of the DYN menu is displayed.

- Press the B button to switch between expander and compressor functions.

- Use the Data Wheels to the right of the display to adjust the parameters. 

 

Limiter Function:

 

- Press the DYN button until PAGE 2 of the DYN menu is displayed.

- Press the B button (next to the 'LIMITER' indicator in the left-hand side of the display).

- Use the Data Wheels to the right of the display to adjust the parameters.

 

Metering Displays

 

- Press the METER button.

- Press the METER button or the PAGE button to cycle through the three different meters (peak/RMS, SPL, VU).

 

Stereo Delay

 

- Press the I/O button until PAGE 4 of the I/O menu is displayed.

- Use the Data Wheels to the right of the display to adjust the parameters.

 

Stereo Imager

 

- Press the WIDTH button until PAGE 1 of the WIDTH menu is displayed.

- Use the Data Wheels to the right of the display to adjust the parameters. 

 

Module Bypass Function

 

- Press the BYP button to enter the Bypass screen.

- Use the Large Data Wheel to select a module to bypass.

- Press the B button to bypass the module.

- Pressing the B button again will re-enable the module. 

 

 


Share this page