How Do I Set Up Three S16 Digital Snakes In A Stage Splitter Configuration?

 

 

 

 

 

 

 

 

 

1. The MASTER S16 would need to be the S16 being used on the "STAGE", so press the CONFIG button on the "STAGE" S16 and turn the SELECT/ADJUST encoder until the S/N MASTER green light comes on. This can be in either 44.1 or 48.


2. Connect the MASTER S16 to the "STAGE MIXER" S16 via AES50 A to AES50 A.

 

3. Press the CONFIG button on the "STAGE MIXER" S16 and turn the SELECT/ADJUST encoder until the screen displays "1-8".

 

4. Connect the "STAGE MIXER" S16 to the "MAIN HOUSE CONSOLE" S16 via AES50 B of the "STAGE MIXER" S16 to AES50 A of the "MAIN HOUSE CONSOLE" S16.

 

5. Press the CONFIG button on the "MAIN HOUSE CONSOLE" S16 and turn the SELECT/ADJUST encoder until the screen displays "1-8".

 

At this point, anything going into the MASTER S16 on the stage will come out of the 1-8 XLR outputs and ADAT 9-16 outputs of the "STAGE MIXER" S16 and the "MAIN HOUSE CONSOLE" S16.

 


Share this page