Microphone- How Do I Setup Multiple Wireless Microphone And Instrument Systems?

 

 

 

 

 

 

 

 

  • Always use fresh, fully charged batteries.
  • Never operate two transmitters on the same frequency at the same time in the same location.
  • Use the scan function to find frequencies that are clear at the location where the system will be used.
  • After initial system set up, conduct a walk test throughout the performance area.
  • Experiment with different system set-ups and receiving antenna locations.
  • During a performance if a receiver is on, keep its corresponding transmitter on. All transmitters in a system turned on will often mask minor incompatibilities. Alternately, if the transmitter is off, make sure that the receiver is muted at the mixing console.

Share this page