Recording- How Do I Record To My Computer Using My UCA Interface?

 

 

 

 

 

 

 

 

 

 

 

1.) Using an RCA stereo cable, make a connection from the TAPE / CD OUTPUTS on the top of your mixer to the inputs of the UCA.


2.) Using a second cable, connect from the output of the UCA to the TAPE / CD INPUTS of the mixer.


3.) Download the correct driver for your computer from the 'Downloads' section of the product's page on our website.


4.) Plug the UCA into your computer's USB port.


4.) On your PC, go to: CONTROL PANEL - >sounds and audio devices.


5.) Click on the AUDIO tab. The recording and playback devices should be set to USB AUDIO CODEC.


6.) Go into preferences or options of the software you are using to choose USB AUDIO CODEC or UCA for the recording device.

 


Share this page