X32- How Do I Set Up Show Control Modes?

 
 
 
 
 
 
 
 
 
 
 
This affects how the 'SCENES' section of the X32 will function. In this example we will cover how to change the SCENES section to scroll through scenes as opposed to Cues which is on by default.

1. Go to the SETUP menu by pressing the 'SETUP' button in the menu panel.

IMG_1772.JPG

2.Under the GLOBAL tab and under 'SHOW CONTROL' select 'SCENES' using the cursors and encoders in the navigation panel.

IMG_1776.JPG

3. The 'SCENES' section will now navigate through the scenes when pressing the 'PREV', 'NEXT, 'GO' buttons . (Please apply the same steps if you wish to control Cues or Snippets from the SCENES section by selecting the relevant options in the Global tab of the Setup menu as shown above).

IMG_1778.JPG
 

 


Share this page