XENYX- How Do I Record The Effects From My X1622USB Into My DAW?

 

 

 

 

 

 

 

 

 

 

The following steps will allow your assigned effects to also be recorded into your DAW:

1.  In the Stereo Aux Return section of the mixer, located just below the effects display, engage the grey button so that the effects are routed to the Sub 1-2.


2.  Bring the Sub 1-2 faders up to the zero position


3.  Engage the button marked "Left" located directly above the Sub 1 fader.


4.  Engage the button marked "Right" located directly above the Sub 2 fader.

This routes the effects prior to the Main Mix fader, which will allow the effect to be recorded into your DAW.  The Left and Right buttons above the Subgroup faders route the signal to the left and right faders of your main mix.  Engaging the Left button on Sub 1 and the Right button on Sub 2 retains the proper stereo field of your effects.

 


Share this page