Products
Support
Community
About Us
Buy
Sign In
Create MUSIC ID
TC Electronic
TC Helicon
Lab Gruppen
Lake
Tannoy
Klark Teknik
Turbosound
Behringer
Bugera
M32- How Do I Update M32 Firmware?
How Do I Update M32/M32R Firmware?
There are 2 procedures for updating the firmware on an M32 console.
Please note if your M32 is currently running firmware v2.10 or earlier you must use method 2.
Method 1:
- Download required
firmware
for your M32.
- Place the firmware file (dcp_corefs file only) on the root of your USB drive (FAT32 format)
- Insert USB into the console
- Go to SETUP>Global
- Use 1st encoder to select "Update FW"
- Select firmware file from the list, click Go and confirm Yes.
The firmware will then update.
Method 2:
- Download required
firmware
for your M32.
- Place the firmware file (dcp_corefs file only) on the root of your USB drive (FAT32 format)
- Power up the console whilst holding down the VIEW button as shown below
- Insert the USB when prompted and the firmware update will begin to run.
Both of these methods are demonstrated in the video below for reference:
Share this page