PRO1, PRO2 and PRO2C - Remove USB Thumb Drive For Startup

For MIDAS Pro1, Pro2 and Pro2C consoles that have an Advantech motherboard installed, it has been discovered that leaving a USB key in the front fader panel will prevent the console from booting up as normal. This issue can be confirmed by the following screen being displayed and remaining indefinitely:

User-added image


We recommend that you always remove the USB key from the console after use and don't insert a USB key until a console is fully booted to prevent this problem from occurring.

(This issue does not affect Midas Pro1/2/2c consoles that have a Fujitsu motherboard).

The video below shows the problem in action:


Share this page