Digital Konnekt x32: Using the Integrator plug-in alongside other audio interfaces


Can I use Digital Konnekt x32 with the Integrator plug-in while using another audio interface as the main inputs and outputs?


We have made some tests with a non-TC audio interface, and the testing showed that it is possible to use Digital Konnekt x32 as a "secondary" interface to integrate external hardware, running along with the interface you'd use for main inputs/outputs. Most importantly, we found that buffer settings of Digital Konnekt x32 should be larger than those on the 'main' interface.
However, it is not officially supported, since testing of this with all interfaces on the market would be an enormous task. We recommend that you try this out with your particular setup and see if it works for you.

Share this page