Ditto X2: Nominal input / Output levels

Question

I would like to know the nominal input and output sensitivities for the Ditto X2 looper. 

Will it accept line level inputs at +4dBu or - 10dBu or does it only run at instrument level: -20dBu?

Answer

The Input of the Ditto X2 is able to handle any input level:

  • From instrument level levels (-20dBu), e.g. your guitar, bass.
  • To line levels (-10dBu ~ +4dBu), e.g. the auxiliary circuit of a mixing console, a microphone preamp, FX loop of a guitar or bass amplifier.

The max input level is approx +20dB, so with the nominal line level at +4dB there is a safe margin.

The input/output impedances are the following:

  • Input impedance: 1 MΩ 
  • Output impedance: 100 Ω

Share this page