Ditto X2: Recording modes

Question

How can I change between recording modes in the Ditto X2?

Answer

By default the recording behaviour is as follows: 1 press starts the recording, and another press stops it. If you then press the switch again, the pedal will overdub.

 Inside the battery compartment you'll find two dipswitches. The first one can change the way the pedal behaves in recording mode. If you flip the switch to its lower position, pressing the Loop switch after recording the initial loop, will switch the Ditto X2 to Overdub mode immediately, thereby making it possible to record your loops in a flow without having to activate recording again for your first overdub.

This feature has been requested by many Ditto owners, and the behaviour for all following overdubs is the same in both the default mode and the second mode.

The second dip switch has no function.


Share this page