G-Major 2: How to reset to factory settings

Question

How to reset G-Major 2 to factory settings?

Answer

Reset system parameters:

  1. Power on while holding RECALL button - The display will show : "G-Major 2 AVR 3.00"
  2. Turn the CONTROL wheel clockwise to display "Reset sys param?" and tap RECALL button to confirm
  3. After a few seconds you should read "Clear/Reset done" - you can power the unit OFF and ON again to start in normal mode.
  4. When restarting in normal mode you should see this message  " > Kernel Cleared <" appear for a few seconds.

Clear the user bank (will erase all user presets):

  1. Power on while holding RECALL button - The display will show : "G-Major 2 AVR 3.00"
  2. Turn the CONTROL wheel clockwise to display "Clear all Presets?" and tap RECALL button to confirm
  3. After a few seconds you should read "Clear/Reset done" - you can power the unit OFF and ON again to start in normal mode.
  4. When restarting in normal mode you should see this message  " > Kernel Cleared <" appear for a few seconds.

Share this page