Gold Channel: Latest software version

Question

What is the latest software version for the Gold Channel?

Answer

The latest software for the GoldChannel is version 1.10.


New Security Lock function added:

At the Utility page a new Security Lock function has been added.

Security Lock:

When activating this parameter the User Interface is locked, and a special preset recall page pops up. Only changes that are possible is to perform Total Recalls from the User- and Card-preset banks. The complete front-panel including Power on/off and input level adjust is locked.

When you want to go back to normal operation with full access to all parameters, press and hold the Power button for three seconds. When you release the power button a pin-code page pops up. Dial in the valid pin-code and press Enter. Now you are back to normal full accessible operation. The pin-code is set with the PIN-CODE parameter.

If you forget your security pin-code, press and hold the Program button while powering up with the power-button on the back-panel to access the Reset page. Select "Reset Pin-Code" and press Enter. Now the pin-code is set to default: 0000, and the machine will power up in full operation mode.

Pin-code:

Select and press Enter to access the pin-code page. Dial in the pin-code you want, and press Enter.
The pin-code can be set to any value between 0001 and 9999.

If you forget your security pin-code, press and hold the Program button while powering up with the power-button on the back-panel to access the Reset page. Select "Reset Pin-Code" and press Enter. Now the pin-code is set to default: 0000, and the machine will power up in full operation mode.

Note: Pin-Code 0000 is the default value and DO NOT give any security, meaning as long as you have not changed the pin-code from 0000, all values will be accepted as valid when you want to unlock the user-interface.


Share this page