HyperGravity: How do I change the bypass mode?

Question:

How do I set my HyperGravity compressor to buffered or true bypass mode? 

Answer:

To set the bypass mode, proceed as follows:

► Disconnect the pedal and turn it on its back.

► Unscrew the back plate of the pedal and look for the two small dip-switches in the upper left corner.

► The upper DIP switch (the one closer to the power in jack), switches between True Bypass mode (default) and Buffered Bypass mode.

► Put the switch to the left for True Bypass, put it to the right for Buffered Bypass.

► Remount the back-plate.

 

Please note: the second dip switch does not have any function


Share this page