P2: How to to the latest software version

Question

What is the latest software version for the P2 and how do I update to it?

Answer

For more information on the current software version for the P2, please see this page.

The P2 update is done with a 512 KB PCMCIA card (S-RAM type 1) containing the new software, which you can also use for storing additional presets.

You can order the PCMCIA card from our online shop.

To update, please follow this procedure:

  1. Insert the PCMCIA card with the software in the port on the front of the unit.
  2. While powering up, hold the WIZARD button,
  3. The display should now show "L".
  4. Press LOCK to confirm to Load the software.
    After a couple of seconds, the unit starts programming its Flash memory. The "L" will be flashing and when completed it will show "+"
  5. Make sure that the display returns to "L", without any errors.
  6. Power off the unit as normal, by holding the POWER key.
  7. Remove the PCMCIA card.
  8. Power on as normal.

Please also see this FAQ: I already have a compatible PCMCIA card, can I download the software and transfer it on the card myself? 

 


Share this page