Unit shows "ERROR, CARD IS WRITE PROTECTED"

Question

My unit shows "ERROR, CARD IS WRITE PROTECTED" when I try to store presets on the card (or copy USER to CARD) - and I have tried to set the write protect switch on the PCMCIA card to the other position ?

Answer

We have unfortunately seen some PCMCIA cards which somehow are not formated correctly.

The solution is, so far to test the PCMCIA card with the built-in selftest:

  • Please power your unit on while holding the BYPASS button.
  • Select "Run test program", press OK/Enter
  • Select test: "PCMCIA", press OK/Enter
  • When OK, power the unit off and on again to start normally.

The card is most likely faulty if it is not OK by now and the write protect switch is set correctly.


Share this page