Weird issues with PCI-based PowerCore cards under Windows


I'm getting error-messages when trying to load plug-ins onto my PCI-based PowerCore under Windows 2000 / XP. My DSP load shows 0% on all 4 DSPs.


Please make sure that your PCI-slots are not overclocked, as this is not supported by the PowerCore platform.

The PCI-based PowerCores only support PCI-slots with PCI Spec 2.2 and above. Your PCI-slots have to be clocked at either 33 MHz or 66 MHz for the PowerCore to work properly.

Share this page