Create MUSIC ID
What kind of switch and cable should I use to tap the tempo on a Flashback Delay 2?
It is possible to connect an external switch to Flashback Delay 2 stereo input, and control the tap tempo.
- The switch must be a momentary single switch. There are many models on the market that can be used. But you will need a special cable to make them work with Flashback Delay 2
- The cable: the tap will be triggered by closing the ring contact of the flashback input. So you need a custom cable that will connect the Ring of a TRS jack to the tip of a TS jack. The Tip on the TRS side should be left without connection. You can also use a standard insert cable (or Y-Split cable) and connect the TS jack that is connected to the Ring of the TRS jack, while the other branch of the Y-cable is not connected - See diagram belows
Y-Split or insert cable:
Custom Switch and cable
Share this page
Access more information.
If you still can't find what you're looking for, contact us
Select the brand, for which you wish to contact us for.
Copyright © 2018 MUSIC Group IP Ltd. All rights reserved.