Correct XT: How to calibrate the pots?

Question

I've found that the pots on my Correct XT are too sensitive or aren't working correctly. Can I re-calibrate them?

Answer

This is how:

  1. While powering on the unit, press and hold "Warmth" and "Pitch" buttons, you will see the "Adaptive" light is on. 
  2. Turn the Shape knob to the furthest LEFT position that it will travel and press "Adaptive". It should start to flash. 
  3. Turn the Shape knob to the furthest RIGHT position that it will travel and press "Adaptive" again. 
  4. "Adaptive" should stay on and the second Adaptive button should light.
  5. Repeat steps 2+3 with the "Dynamics" knob and second Adaptive button. 
  6. Both adaptive buttons should stay on and Display should light.
  7. Repeat steps 2+3 with the "Pitch" knob and "Display" button. 

The regular display should kick in a few seconds after completing the process.


Share this page