Create MUSIC ID
Perform-VK: Vocals only when using the instrument input
Is it possible to separate the outputs on Perform-VK to have a vocals only output or Dual Mono style output?
Currently, the only output option for the Perform-VK is a summed stereo option. This means it is not possible to separate the outputs in a Dual Mono style, with the instrument coming out of one output and the vocals coming out of the other. However, it is possible to have a vocals only output, with a bit of trickery and "cables to no-where"!
It's easiest to explain in picture form:
Well how does this work? The unit will sum up the signals coming in from the inputs, and put them out through the output as stereo. In this case, the unit is receiving sound from the left instrument input, and silence from the right, and vocals on both sides. When only using the right output, it will look at whats coming in through the right
- silence - and pass that out to your mixer/PA! It will still pass your vocals, and it will still follow the chords your play on your instrument for Naturalplay.
Share this page
Access more information.
If you still can't find what you're looking for, contact us
Copyright © 2018 MUSIC Group IP Ltd. All rights reserved.