Is it possible to run the Backing Tracks isolated of out the Headphone Out and if so, how?
Yes, this is possible and would allow to Backing Tracks to have their own, isolated output of sorts. In order to achieve it, it takes a bit of tweaking in the Mix Menu:
- Under Main Mix, you need to set TRACK (scroll down) to OFF.
- Under Headphone Mix you need to turn everything to OFF with the exception of HEADPH OUT AND TRACK LEVEL (again, scroll down).
Please note: This may not be an absolutely water-tight solution to isolating the Backing Tracks since some bleed into the Main Mix from the Headphone Out may occur.