VoiceTone Correct XT: Re-calibrating the pots

Question

I've found that the pots on my Correct XT are too sensitive or aren't working correctly. Can I re-calibrate them?

Answer

Yes, you can re-calibrate the pots on your device. Here's how to do it for the Correct XT:

  1. While powering on the unit, press and hold "WARMTH" and "PITCH".
  2. You should see just the "ADAPTIVE" light (below Shape) ON.
  3. Turn the "SHAPE" knob to the furthest LEFT position that it will travel and press "ADAPTIVE". It should start to flash...
  4. Turn the "SHAPE" knob to the furthest RIGHT position that it will travel and press "ADAPTIVE" again.
  5. "ADAPTIVE" (below Shape) should turn off and "ADAPTIVE" (below Dynamics) should light.
  6. Repeat steps 3+4 with the "DYNAMICS" knob and "ADAPTIVE" button.
  7. "ADAPTIVE" (below Dynamics) should turn off and "DISPLAY" should light.
  8. Repeat steps 3+4 with the "PITCH" knob and "DISPLAY" button.
  9. The regular display should kick in a few seconds after completing the process.

 


Share this page